Features

  • Resonance frequencies within 2 - 30 MHz
  • BBAR @ SWIR 1.0 - 1.7µm with R_avg < 1% (typ.)
  • Extinction ratios up to 2000:1 available
  • High transmission with T>98% (typ.)
  • High efficiency / low RF drive power/ high Q-factor
  • Models for high optical power
  • Standard large aperture for easy alignment
  • Damped piezo- and acoustic resonances

Typical Applications

  • Mode locking
  • Lock-In detection
  • Light chopper
  • Polarisation modulation
  • Quantum computation / simulation
AM7-SWIR - Series

Required Information

Resonance Frequency*
Wavelength*
Beam diameter*
Optical power*
Laser operation mode*
Required modulation depth (%)
Additional Information
Application
Extinction ratio
Quantity

Choose Your Options

-

Tuning: +T

  • tunable resonance frequency fo
  • tuning range: ca. fo +/- 15% (typ.)
  • for precision frequency adjustment &
  • frequency drift compensation
  • extended tuning ranges available

DC port: +DC

  • Extra DC-port (SMA)
  • Bandwidth 0-10kHz (typ.)
  • for birefringence compensation,
  • active RAM suppression &
  • work point adjustment (AM)
  • compatible with several housing types

T-control: +TXC

  • allows T-ctrl. & stabilisation of EOMs
  • for active cooling of high power models
  • & active RAM suppression
  • incl. therm. mounting, T-sensor, TEC
  • requires separate Temp.-controller
  • compatible with several housing types

Custom AR: +AR

  • custom specific AR coatings
  • typ. R < 0.1% for single wavelength
  • multi-wavelength AR available
  • AR for high power applications

AM kit: +AM

  • Five-Axis Stage:
  • for precision alignment EOM <=> Laser
  • 30mm Cage system rotation mounts:
  • for polarisation optics

Go back

Background Information
Fig. 1 | Symbolisation of a polarisation modulation.
Fig. 2 | Characteristic features (Smith chart with Q-circle, S21) of a resonant system visualised with a vector network analyser (VNA).
Fig. 3 | A typical setup for generating fast a) polarisation or b) amplitude modulation in a laser beam. c) Optical transfer function of a Sénarmont-type setup b) as a function of the analyser (P2) angle and the applied voltage U.

Altered Laser Property: Polarization/Amplitude

A transverse electromagnetic wave such as light consists of a coupled electric and magnetic field which oscillate perpendicularly to the direction of propagation. By convention, the “polarisation” of electromagnetic waves refers to the direction of the electric field. In case the direction of this electric field is well defined, the light is called polarised. Depending on how the electric field is oriented, one distinguishes between

  • Linear polarisation: the electric field of light oscillates in a single plane along the direction of propagation
  • Circular polarisation: the electric field rotates in a circle around the direction of propagation. Depending on the rotation direction, it is called left- or right-hand circularly polarised light.
  • Elliptical polarisation: the electric field of light describes an ellipse.

Mathematically polarisation is treated either by the Jones or the Mueller calculus, depending on whether the light is fully polarised or not.

Coupling: Resonant

QUBIG’s resonant modulators consist of electro-optic crystals that are coupled via a resonance circuitry to an RF input connector. This high-Q tank circuit is used to boost the input signal which eventually reduces the required RF power needed to achieve a desired modulation depth. An impedance matching network transforms the reactive crystal load to a 50Ohms input.

Effect on the Laser Light: Polarisation / Amplitude Modulation

Electro-optic amplitude modulators (AM) are essentially Pockels cells consisting of a single or multiple electro-optic crystals with zero or compensated natural birefringence. Applying an electric field to the crystal induces a change in both the ordinary and ­extraordinary indices of refraction giving rise to an electric field dependent birefringence which leads to a change in the polarisation state of the transmitted optical beam. In this way the ­electro-optic crystal acts as a variable waveplate with retardance ­linearly dependent on the applied electric field. By placing a linear ­polariser after the modulator, the beam intensity through the ­polariser varies quasi sinusoidally with linear change in applied voltage. The voltage required to produce a retardance of π radians is called the halfwave voltage or simply Vπ.

Typical Applications

QUBIG provides resonantly enhanced, very efficient polarisation modulators that can be converted with appropriate polarisation optics into high-frequency amplitude/intensity modulators. Large spectral bandwidth, very low insertion loss, high optical damage thresholds and extinction ratios up to 30dB enable a wide range of applications.

Fig. 1 | Typical Lock-In detection scheme for measuring the phase and amplitude of very weak optical signals relative to a reference.
Fig. 2 | Basic LiDAR operating principle based on the Time Of Flight (TOF) method.
Fig. 3 | Schematic of a basic single photon multiplexing arrangement.
Fig. 4 | Simplified schematic illustration of the Bell-Bloom magnetometer principle.

Lock-In Detection

Amplitude modulators in combination with Lock-In amplifiers are suited for ultra-precision spectroscopy applications like optical gas detectors which are commonly used to measure air pollution or highly toxic gases / materials. Furthermore, in science and research fast intensity modulation is a common and established method for driving quantum state transitions in e.g. Rydberg atoms or ultra-cold quantum gases made of neutral atoms, ions or molecules.

LiDAR

(Light Detection And Ranging) is a surveying method that measures distance to an ­object by illuminating the target with pulsed laser light and measuring the reflected pulses with a sensor. Differences in laser ­return times and wavelengths can then be used to make digital 3-D representations of the ­target. ­LiDAR is the analogy to Radar, ­using ­laser instead of ­radio wave. ­Amplitude modulators from QUBIG are useful tools to generate ultra-fast laser ­intensity modulations.

Single Photon Multiplexing

Parametric single-photon sources are promising candidates for large-scale quantum networks due to their potential for photonic integration. Optical switches are used for active multiplexing of photons in order to overcome the intrinsically probabilistic nature of these sources, resulting in near-deterministic operation. The switching itself can be achieved by fast polarisation modulators that possess a high optical transmission and extinction ratio.

Magnetometry

The atomic magnetometer detects an external magnetic field by exciting atomic magnetic dipole transitions via modulated light (Bell–Bloom magnetometer) and measuring the coherent precession frequency of atomic spins about the external magnetic field . Besides SQUIDs, atomic magnetometer are the most sensitive magnetometers which are used in many significant fields, such as medicine, tests of fundamental symmetries, space exploration, and detection of nuclear magnetic resonance signals.

University of Alberta
University of Amsterdam
ANU
Aston
Berkeley
Bethel
Bielefeld
Birmingham
Bochum
Bonn
Berkeley
Boulder
Cardiff
Cern
Chinese Academy
College de France
CNRS
CSIR
CSRI
Dartmouth
Delhi
TU Denmark
DESY
Eindhoven
Ben Gurion
ENS
EPFL
FAU
ESO
ETH
Fraunhofer
Freiburg
Geneve
GIT
Griffith
Harvard
Heidelberg
Hohenheim
Honeywell
Heiderabad
HZDR
ICFO
Illinois
Indiana
INRIM
Laue
IOTA
IOQOI
KAIST
Kiel
Hannover
Liege
LKB
Gorbonne
ILP
Hamburg
Mainz
Maryland
Missouri
MIT
MPQ
Nanyang
NIST
NISA
Nottingham
NPL
Observatoire Paris
Oklahoma
Paderborn
Sorbonne
Peking
PISA
MILANO
PTB
Purdue
RAL
RRCAT
RRI
RICE
Saarland
Sandia
NUS
Southhampton
SRI
Stanford
Strathclyde
Stellenbosch
Stuttgart
Sussex
Sydney
TelAvis
Thales
Tokyo
Torun
Toulouse
Trento
Kaiserslautern
Darmstadt
TUM
Prag
Tbingen
Riverside
UIBK
ULM
Manchester
Queensland
Cambridge
Oxford
Florenz
Toronto
Weizmann
Zeiss