Features

  • Bandwidth up to 200MHz
  • Brewster angle design wavelength @ 5μm
  • R_avg < 1% (typ.) within 3.1 - 7.4μm
  • No beam displacement
  • High transmission with T>98% (typ.)
  • Models for high optical power
  • Standard large aperture for easy alignment
  • Damped piezo- and acoustic resonances

Typical Applications

  • Interferometry
  • Q-Switch
  • Laser frequency stabilisation (intra cavity)
  • Intensity control (Mach-Zehnder)
  • Broadband phase modulation
PS - MWIR - Series

Required Information

Wavelength*
Beam diameter*
Optical power*
Required modulation depth*
Laser operation mode*
Bandwidth
Additional Information
Application
Quantity

Choose Your Options

-

T-control: +TXC

  • allows T-ctrl. & stabilisation of EOMs
  • for active cooling of high power models
  • & active RAM suppression
  • incl. therm. mounting, T-sensor, TEC
  • requires separate Temp.-controller
  • compatible with several housing types

Custom AR: +AR

  • custom specific AR coatings
  • typ. R < 0.1% for single wavelength
  • multi-wavelength AR available
  • AR for high power applications

Go back

Background Information
Fig. 1 | Illustration of a linear phase sweep representing arbitrary control of light retardation.
Fig. 2 | Typical frequency response (depicted as Bode plot) of a DC coupled phase shifter.
Fig. 3 | Mach-Zehnder interferometer with an electro-optic phase

Altered Light Property: Phase

Light in free space can be described by an electromagnetic wave which propagates transversely to the propagation direction with the speed of light. When passing through material the light velocity is reduced by the refractive index. The phase retardation caused by the element is obtained by measuring the optical path difference (OPD) in setups based on the interference principle (Michelson, Mach-Zehnder, Young).

Coupling: DC / Broadband

The electro-optic crystal is directly coupled to the RF modulation input connector, allowing the full bandwidth of the crystal to be utilised. The bandwidth of a DC-coupled phase shifter is limited by the output impedance of the driver that forms with the capacitance of the crystal a low-pass filter. For typical retarders with 50Ohms coupling (via e.g. SMA) the limit is about 150MHz. Applications with nano-second response times require much higher bandwidths. In such cases the high voltage is coupled directly to the eo-crystal via very short, flying leads.

Effect on the laser light: Optical retardation / Phase shifts

QUBIG’s phase shifters provide a voltage dependent phase retardation on a linearly polarised input beam by inducing a change in the crystal’s extraordinary index of refraction via the electro-optic effect.

The control signal can be a DC/HV signal for interferometry applications. In case the control voltage is a time varying RF signal, the optical beam undergoes a phase modulation whereby the energy at the carrier frequency is converted into sidebands separated from the fundamental frequency by the integer multiples of the modulating frequency. Note: As the electro-optic effect is generally weak and no resonant enhancement is implemented several hundred volts might be required to achieve a significant effect.

Typical Applications

QUBIG provides DC-coupled phase shifters with large spectral bandwidth, very low optical insertion loss, high optical quality and damage thresholds that enable a wide range of applications such as:

Fig. 1 | Phase shifter placed in one arm of a Michelson interferometer.
Fig. 2 | Illustration of single atoms in an optical lattice manipulated by a phase shifter.
Fig. 3 | Intra-cavity phase shifter placed in a Fabry-Pèrot interferometer.

Interferometry

Broadband DC-coupled electro-optic phase shifters are often used in one arm of an interferometer to precisely control the relative optical path length between the arms. Interferometers are widely used in science and industry for extremely accurate and complex measurements of small displacements, refractive index changes and surface irregularities. A recent example is the detection of extremely weak gravitational waves with a Michelson interferometer at LIGO (Nobel price 2017) which confirms yet again Einstein’s general relativity theory.

Optical lattices

Electro-optic phase shifters find versatile use in many areas of science and research. They have been successfully deployed for electro-optic bandwidth compression of optical wavepackets (eo time lens), optical serrodyne frequency shifting of laser light or the manipulation of neutral atoms in optical dipole traps and lattices. Potential applications can be found in ultrafast spectroscopy, high-speed communications and even optical quantum science and technology.

Intra-Cavity

Intracavity electro-optical modulators are commonly used in external cavity diode lasers (ECDL) for stabilising their frequency to an ultra-stable reference. Due to their fast response times frequency noise up to the high MHz regime can be efficiently suppressed. Only a few volts (i.e. small phase shifts) are usually required for significant noise reduction at high frequencies, as large amplitude, low frequency noise on the laser light is typically pre-compensated by piezo actuators.

University of Alberta
University of Amsterdam
ANU
Aston
Berkeley
Bethel
Bielefeld
Birmingham
Bochum
Bonn
Berkeley
Boulder
Cardiff
Cern
Chinese Academy
College de France
CNRS
CSIR
CSRI
Dartmouth
Delhi
TU Denmark
DESY
Eindhoven
Ben Gurion
ENS
EPFL
FAU
ESO
ETH
Fraunhofer
Freiburg
Geneve
GIT
Griffith
Harvard
Heidelberg
Hohenheim
Honeywell
Heiderabad
HZDR
ICFO
Illinois
Indiana
INRIM
Laue
IOTA
IOQOI
KAIST
Kiel
Hannover
Liege
LKB
Gorbonne
ILP
Hamburg
Mainz
Maryland
Missouri
MIT
MPQ
Nanyang
NIST
NISA
Nottingham
NPL
Observatoire Paris
Oklahoma
Paderborn
Sorbonne
Peking
PISA
MILANO
PTB
Purdue
RAL
RRCAT
RRI
RICE
Saarland
Sandia
NUS
Southhampton
SRI
Stanford
Strathclyde
Stellenbosch
Stuttgart
Sussex
Sydney
TelAvis
Thales
Tokyo
Torun
Toulouse
Trento
Kaiserslautern
Darmstadt
TUM
Prag
Tbingen
Riverside
UIBK
ULM
Manchester
Queensland
Cambridge
Oxford
Florenz
Toronto
Weizmann
Zeiss