The DR-PL-SERIES modulator drivers are RF amplifier modules designed to drive LiNb03 modulators so as to generate undistorted optical pulses.
The DR-PL driver series is optimized for low Pulse Repetition Frequency (PRF) signals, with bandwidths up to 20 GHz. It accommodates pulse trains with repetition rate as low as several seconds, short rise and fall time (down to 16 ps), high extinction ratio and width up to 10 ns. The DR-PL-10-MO modulator driver comes in a compact connectorized module that matches directly with Photline Technologies phase and intensity modulators. It operates from a single voltage power supply for ease and safety of use and features an output voltage control for maximum flexibility. An optional heat sink is proposed as a complementary equipment.
BROADBAND RF AMPLIFIER - iXblue Cut-off frequencies: 50kHz - 40GHz Output voltage: 20dBm Gain: 26 - 30dB Noise figure: 3dB Applications: Analog signal amplification
BROADBAND RF AMPLIFIER - iXblue Cut-off frequencies: 50kHz - 40GHz Output voltage: 20dBm Gain: 26 - 30dB Noise figure: 3dB Applications: Digital signal amplification
MODULATOR BIAS CONTROLLER - iXblue Autoset mode: Min, Max, Quad+/- Locking range: 360° Dither: yes (ca. 1KHz, <1Vpp) Wavelength range: 600 - 1600nm
Go back
QUBIG GMBH
Balanstr. 57, 81541 MunichBavaria, Germany
P: +49 89 230 291 01 F: +49 89 230 291 02
mail [at] qubig.com
ELECTRO-OPTIC MODULATORS
Phase Modulators
Amplitude Modulators
Phase Shifters
Pockels Cells
ELECTRONICS
RF Driver
HV Driver
Photodiodes
FIBER MODULATORS
Fiber Modulators
RF Drivers
Modulator Bias Controller
CONTACT
Distributors
Support
Imprint
Terms of Sale
Data Protection